How to Fit and Replace Lungs in PractiMan Plus and Advanced Manikins

Welcome to our tutorial on preparing your PractiMan Plus and Advanced manikins for CPR training by installing or replacing their lungs.

Identifying the Correct Lungs

Firstly, check that you have the appropriate lungs for your model. For the PractiMan Advanced and Plus, you need the 35 centimeter lungs. Avoid the longer lungs meant for the basic model, as they won’t fit properly.

Fitting Female Skins On Practiman Manikins

Before you begin, ensure the manikin is ready for the lung installation. If this is your initial setup, follow these instructions to insert the lungs. If you’re swapping out lungs between classes, the process remains the same:

• Begin by removing the skins. Unclip the sides to free the main skin and detach the head to access the internal airway valve.
• If the manikin is new, you might find the airway valve is unattached. Simply place the valve and click it into position. The design facilitates quick and easy installation.

Installing the Lungs

Grab a new lung and align its self-adhesive pad with the mark inside the chest. Center it carefully before pressing it down firmly. Keep the lung flat to avoid any creases or bumps.

Guide the top of the lung towards the neck and connect it to the airway valve. You might find it easier to push it onto the valve from the front or thread it through from the back—choose the method that feels most straightforward to you. Make sure the lung isn’t twisted, as this can block air flow.

Once the lung is securely in place, reattach the head by aligning it with the lugs on the sides of the neck and snapping it on.

Final Adjustments

Place the face skin over the manikin, ensuring proper alignment before securing it on the sides. Check that the face is firmly attached at the top and that the airway moves freely without any restrictions.

Reattach the main skin by aligning the clips along the sides. This step is crucial in Fitting Female Skins On Practiman Manikins as it guarantees the manikin’s functionality and realism for training.

Testing the Setup

Finally, conduct a quick test by opening the manikin’s airway to confirm that the lungs inflate properly and without any hindrance. This check ensures everything is set correctly, and your PractiMan is ready for the next session.

By following these detailed steps, you’ll ensure your PractiMan manikins are always well-prepared and functional, supporting effective CPR training across various scenarios.